Accton Technology RG230 Operation & User’s Manual

24, 2-2 Installing the RG230 2 Cable Connections The RG230 is a plug-and-play device, so once it has been connected to your PC and powered up, it is fully operable. Functioning as a gateway, the unit routes traffic between a WiMAX service provider’s base station and PCs or notebooks in the …

3, User Guide RG230 Indoor IEEE 802.16e-2005 Mobile WiMAX Gateway, with 2.3/2.5/3.5 GHz Frequency Band Support, Four LAN (RJ-45) Ports, Two Optional VoIP (RJ-11) Ports, and Optional 802.11g Wi-Fi …

59, Dial Plan 7-3 7 Dial Plan Dial-plan strings specify key sequences used for specific calling features (Transfer, New Call, 3-way conference), as well as defining call restriction filters. A dial plan can filter the number and pattern of digits that a user dials to reach a particular …

48, Gateway Configuration 5-8 5 Client Filtering You can block access to the Internet from clients on the local network by specifying IP addresses and TCP/UDP port numbers. You can configure up to five IP filters on the unit. Figure 5-8 Client Filtering Settings Enable Client Filter – Ena…

80, Accton Technology RG230 Glossary Glossary-2 bandwidth, which is measured in Megahertz (MHz). WiMAX supports a range of channel bandwidths that can be defined by the service operator depending on performance requirements, operating preferences, and regulatory constraints. CPE (Customer-Premises Equipment) Termin…

43, NAT 5-3 5 Lease Time – Selects a time limit for the use of an IP address form the IP pool. When the time limit expires, the client has to request a new IP address. (Default: Half hour; Options: Half hour, one hour, two hours, half day, one day, two days, one week, two weeks) Local Domain N…