M-LOCKS EM3020 Manual, Mounting Instructions

7, 7www.m-locks.com Motor lock V01 EN 7 DATA SHEET EM2520 / EM3020 / EM2520 S / EM3020 S EM3050 / EM3050 S EM3050 AB Opening Automatic Automatc Automatic Locking Automatic / PTC Automatic / PTC Automatic / PTC Blocking element Blocking gear / Motor Blocking gear / Motor Blocking gear / Mo…

4, 4 www.m-locks.com 3 GENERAL The VdS recognition of this lock is based on this mounting instruction. Read carefully. The force applied to the lock bolt should not exceed 1 KN. If higher force is applied, please consult with the testing institute (i.e. UL, VdS). Only use supplied screws to mount …

6, 6 www.m-locks.com 6 FUNCTIONAL TEST Functional tests alway with door open! • Enter code (1,2,3,4,5,6 or 5,5,5,5,5,5). • Turn boltwork handle towards ‘OPEN’ position. • For EM2520: After approximately 5 seconds, the motor can be heard again when it pushes the lock …

5, M-LOCKS EM3020 5www.m-locks.com Motor lock V01 EN 4 BOLT REQUIREMENTS AND LOCK MOUNTING The force applied to the lock bolt in locked condition must not exceed 1 KN (p. E. by a preconceived breaking point). If higher force is desired please consult with the manufacturer. Only use supplied screws …