Davey EMX3600 Manual, Installation & Operation Instructions

8, 8 PRE-START UP PROCEDURE Before operating your EcoMineral Pool Sanitiser System please ensure the following quantity of EcoMineral Salt (P/N: EMSALT-15) and EcoMineral Activator (P/N: EMACT-15) has been added to your pool. CONVERTING EXISTING SALT POOLS NEW MINERAL SALT POOLS Pool …

19, 19 TROUBLE SHOOTING No Chlorine Production - Check for: 1. Main power outlet switched off 2. Sanitiser not plugged into main outlet 3. Pump not plugged into Sanitiser 4. Time Clock set to Off position/Power switch turned Off 5. Sanitiser Output Control turned to “0” setting 6. Sanitis…

16, 16 DAY TO DAY OPERATION Four Prime rules must be observed if your unit is to give the best possible service: 1. STABILISER The importance of pool stabiliser cannot be over – emphasised. It is essential in helping retain chlorine in your pool. Chlorine is rapidly dissipated by su…

9, 9 STORAGE AND SAFETY 1. Store in a dry, covered place away from direct sunlight for longer bag life 2. Always use the entire bag content of EcoMineral Salt, once opened. Do not keep open bags of EcoMineral Salt as it is sensitive to moisture in the air. 3. Care should be taken to avoid contact with…

6, Davey EMX3600 6 CONNECTING THE IN-LINE ELECTROLYTIC CELL TO THE POWER SUPPLY The EcoMineral System uses a reverse polarity In-Line Electrolytic Cell for low maintenance operation. The EcoMineral Power Supply is tted with a exible lead terminated with push on brass connectors for the EMX2400 model a…

10, 10 CONTROL PANEL LAYOUT SELECTOR SWITCH 1 2 3 4 5 6 7 8 Clock Timer 1 - ON Timer 1 - OFF Timer 2 - ON Timer 2 - OFF Automatic Manual - ON OFF POLARITY FUSE 3A OPERATION EcoMineral ® A B 0% 100% 6 8:00 AM Once the TDS level in the pool is correct the unit may be switched on. Note: Once…