DataCard CR805 Operation & User’s Manual

131, CR805 Retransfer Card Printer User’s Guide A-9 5. Load the new roll of laminator overlay material. a. Put the blue supply spool on the blue supply spindle of the cartridge (c). The overlay supply roll can go on only one way and only fits on the correct spindle. b. Put the empty s…

94, DataCard CR805 78 Troubleshooting 6. Remove any slack in the ink ribbon or retransfer film. 7. Reinstall the cartridge into the printer until it clicks into position. 8. Close the printer access door and lock the printer. …

89, CR805 Retransfer Card Printer User’s Guide 73 Advanced Troubleshooting Tools Printer Manager provides access to card design settings and additional troubleshooting tools. Printer Manager also allows you to perform advanced troubleshooting with the guidance of your service provid…

40, 24 Using the Printer Retrieve an IPv4 Address Do the following to display an IPv4 address using the Status menu. You also can display the subnet mask, gateway address, and MAC address, if necessary. Begin with the printer power connected, and the printer connected to the netw…

71, CR805 Retransfer Card Printer User’s Guide 55 Empty the Printer Reject Tray The printer places rejected cards (unfinished cards or cards that were not processed properly) in the reject tray. You should empty the reject tray whenever the retransfer film is replaced, or more o…