Acroprint ATR360 Quick Start Manual

1, Page 1 of 6 06‐0421‐000 Rev. B Model ATR360 Quick Start Setup For complete instructions please reference the ATR360 User Manual, website: www.acroprint.com or call Service at 919-872-5800 Option 1. Initial Setup: Remove top cover by turning clock key and pulling up, lo…

2, Page 2 of 6 06‐0421‐000 Rev. B Setting Start and End of DST • Set the Start Date of DST: o The mode indicator “09” will be flashing, press P6 to select o Press P4 or P5 to select the correct month (US-March) and Press P6 to save o Press P4 or P5 to select the correct date and …

3, Acroprint ATR360 Page 3 of 6 06‐0421‐000 Rev. B • If you do not require a second or third fingerprint to be registered, press cancel and the next user will appear in the small display. To register a second and third fingerprint, see below. • The LED display will read F.P.2.1 – to register a sec…

4, Page 4 of 6 06‐0421‐000 Rev. B Badge (Card) Setup • The user may also be issued a badge in place of using the fingerprint reader, set up follows the same procedure as entering a fingerprint (see above) • When ADD.U appears on the display press the enter button one time U001 will …

5, Page 5 of 6 06‐0421‐000 Rev. B See diagram: In Out Shift Intervals Company Date Example From To PE1 7:00 11:00 PE2 11:01 13:20 PE3 13:21 16:30 PE4 16:31 20:00 …

6, Page 6 of 6 06‐0421‐000 Rev. B Using the Time Clock Using the Time Card to Clock In or Out • When clocking IN: P1, P3 or P5 must be selected • When clocking OUT: P2, P4 or P6 must be selected • Insert the time card with the current week facing you and the card in the upr…