Eizo RadiForce GX560 User Manual Manual

28, 28 Appendix FCC Declaration of Conformity For U.S.A., Canada Only FCC Declaration of Conformity We, the Responsible Party EIZO Inc. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: RadiForce GX560 is in conformity with Part 15…

2, 2 SAFETY SYMBOLS This manual and this product use the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the informa…

18, Eizo RadiForce GX560 2-3. Turning On the Power 1. Touch to turn on the power to the monitor. The power switch indicator of the monitor lights up green. If the indicator does not light up, see “Chapter 3 No-Picture Problem” (page 19). Note • To nd the location of the power switch when the monitor p…

19, Chapter 3 No-Picture Problem Problem Possible cause and remedy 1. No picture • Power switch indicator does not light up • Check whether the power cord is connected properly. • Turn the main power switch on. • Touch . • Turn off the main power, and then turn it on again.…

16, When connecting other monitors using a daisy-chain connection Output the signal input into to another monitor. Attention • Visit the EIZO website for information about monitors and graphic boards that can be used for the daisy- chain connection: http://www.eizoglobal.com • When using a …

13, 1-3. Controls and Functions 4 3 12 13 2 1 107 95 15 14 6 8 11 Approx. 30° 1. Integrated Front Sensor (Movable) This sensor is used to perform calibration and Grayscale Check. 2. Ambient Light Sensor This sensor measures environmental illumination. Environmental illuminance measurement i…