Badger Meter Blancett B2800 Standard Operation & User’s Manual

11, Badger Meter Blancett B2800 Standard DIMENSIONS A B C D E A B C D E 4.25 in. (107.9 mm) 4.25 in. (107.9 mm) 0.75 in. (19.0 mm) 2.50 in. (63.5 mm) 4.54 in. (115.3 mm) TROUBLESHOOTING GUIDE Issue Remedy No LCD display • Check battery voltage. Should be 1.5V DC. Replace if low or bad. No rate or total displayed • Check co…

3, SCOPE OF THIS MANUAL This manual is intended to help you get the B2800 flow monitor up and running quickly. MPORTANTI Read this manual carefully before attempting any installation or operation. Keep the manual accessible for future reference. UNPACKING AND INSPECTION Upon opening the shippi…

10, SPECIFICATIONS Power Supply Options Battery Powered One D size, 1.5V alkaline battery Loop Powered Optional 4…20 mA loop power Alphanumeric Rate and Total Display Eight digit, 0.50 inch high numeric display Eight character, 0.25 inch high alphanumeric display Fixed or toggle modes of o…

8, ADDITIONAL SCALING PARAMETERS OTE:N The programming instructions below are only available for loop powered units. Battery powered units do not include these programming parameters. Flow 4 mA Setting Zero is the default flow rate at the 4 mA setting. If the current selection is c…

12, DEFAULT KFACTOR VALUES Meter Size Default K-factor Lower Limit Upper Limit 3⁄8 in. (9.53 mm) 20,000 16,000 24,000 1/2 in. (12.7 mm) 13,000 10,400 15,600 3/4 in. (19.05 mm) 2750 2200 3300 7⁄8 in. (22.23 mm) 2686 2148 3223 1 in. (25.4 mm) 870.0 696.0 1044 1-1/2 in. (38.1 mm) 330.0 264.0 396.…