Cadet Energy Plus CEC163TW Owner's Manual

5, Cadet Energy Plus CEC163TW INSTALLATION INSTRUCTIONS INSERT THE HEATER ASSEMBLY IN THE WALL CAN Wire connections STEP 4 Install grill STEP 5 Attach grill with screws provided. Turn electrical power back on at the main disconnect panel. Wait 10 to 15 seconds for heater to power up before pushing any butto…

2, SAVE THESE INSTRUCTIONS IMPORTANT INSTRUCTIONS 1. Read all instructions before install- ing or using this heater. 2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combus- tible materials, such as furniture, pillows, bedding, p…

8, MAINTAINING YOUR HEATER Clean heater at least every 6 months or as required. Do not lubricate motor. 1. Turn off power at the main disconnect panel. 2. Wait for the heater to cool. 3. Remove grill. 4. Wash grill with hot soapy water and dry. 5. Blow air through the heating element with…

3, TOOLS REQUIRED Tape Measure Straight and Phillips Screwdrivers1½" Wood ScrewsWire Strippers Wire Connectors ½" Cable Clamp Connector Volt Meter Drill and Drill Bits Stud Finder A multi-purpose tool or something to cut your existing drywall or gypsum board. ® ® �…

4, • Verify power has been turned off before starting any work! • The Energy Plus can only be mounted with the element up. It cannot be mounted in the ceiling or in the floor. For multiple heater wiring, see page 6. • For cleaner performance and longer heater life, install …