Bachmann BlueNet BN3000 Mounting And Installation Instructions Manual

10, Colour Light Status Blue, purple 500 ms blue, 500 ms purple An update of a PDU is in progress Blue, purple, red 500 ms blue, 500 ms purple, 500 ms blue, 500 ms red Error during the update of a PDU In operation Colour Light Status Orange 900 ms off, 100 ms orange Connection to Maste…

24, 5.4 Connecting the PDU to the power supply WARNING! Risk of fatal injury due to electric current! If live components are touched, there is an imminent risk of fatal injury due an electric shock. Damage to the insulation or the individual components can constitute a life-threatening da…

22, Bachmann BlueNet BN3000 3. Fasten the PDU to the rack with screws via both plug-in brackets (Fig. 20). 5.3.5 Installation with the mounting solution in the rack Personnel: n IT specialist 1. Unscrew the attachment for the mounting bracket with a screwdriver (Fig. 21/Ⓐ). Fig. 20: Rack with PDU Fig. 21: Uns…

35, 11 Technical data The technical specifications of the PDU are set out on the nameplate and the data sheet. The nameplate is located on the housing of the PDU and contains the following information: n Product name n Item number n Serial number n MAC address (physical network address) n Rate…

23, 2. Fit the PDU into the provided fitting slots via the attachment for the existing mounting solution in the rack (Fig. 22). 3. Check that the PDU is fitted securely into the cabinet. Fig. 22: Fitting the PDU in the rack with mounting solution A PDU B Mounting solution in the rack (example) Fig…

16, 4 Unpacking the PDU n Unpack the delivery and check its completeness and integrity. If there is a defect, contact Bachmann GmbH immediately. n If possible, keep the packaging of the PDU so that the PDU can be safely stored and transferred in the future. Dispose of the packaging material that is…