CABAC CABPAT Product Manual

23, CABAC CABPAT 23 PRODUCT MANUAL 7 Battery Check The CABPAT is powered from a 6 AA cells which are checked before a test is performed. When the battery voltage is low the enunciator is illuminated. The unit will continue to perform within specication for a …

24, 24 PRODUCT MANUAL 8 Fuse The unit is protected by a fuse. If the fuse should blow then the mains tests will not be allowed to start and the CABPAT will indicate that the mains connection is incorrect. 8.1 Fuse Replacement Before opening the CABPA…

12, 12 PRODUCT MANUAL The unit will now perform an Insulation test. If the Insulation Resistance is less than 1Mohm the FAIL enunciator is illuminated. If the Insulation Resistance is greater than or equal to 1Mohm a tick is placed next to the RISO enunciator. The PASS enunciator is ill…

3, 3 PRODUCT MANUAL 1 Important Information These operating instructions are intended for the use of adequately trained personnel. The following symbols are used in these operating instructions and on the CABPAT. Caution, risk of electric shock. Indicates instructions must be followe…

16, 16 PRODUCT MANUAL 3.7a Test an EPOD (Powerboard) Visually inspect the appliance as per requirements of AS/NZS3760. If the cord passes a visual inspection proceed with the electrical tests. AS/NZS3760 requires an earth resistance test to be performed to each outlet. Operators …