E-fly 100C Operating Manual

7, E-fly 100C A：Antenna B：LCD(Liquid Crystal Display) 1）To indicate the battery voltage of transmitter 2）To show the situation of channels whether it is reversed 3）To show the flying time 4）To indicate flying mode C：Tiny Mix 1 D：Tiny Mix 2 E：Switch 1 This switch is…

3, Servo: AS-100(9 g) 3pcs Speed controller: ESC-30A 1pcs Bettery packs: 9.6V/Ni-MH 1pcs Charger: 1pcs Transmitter: ETC61-2.4GHz 1pcs Receiver…

8, Alarm for low voltage of transmitter Other function of transmitter When the voltage of transmitter battery is under working voltage, the red LED will flash.It is better to stop flying,or that can cause crash of model. Switch for servo reverse operation During using, if servos mov…

11, Operation for transmitter and servo For operating helicopter Rudder Operation Joystick for Rudder left forward the plane will turn anticlockwise Joystick for Rudder right forward the plane will turn deasil Throttle Operation Joystick is up forward, the power becomes large Joystic…

13, Adjustmen order Charge method of battery Charge method： 1.Turn off the transmitter, connect the transmitter with the charger in the kits (Note: Please make sure the transmitter be off before charging, It will not charged unless it is off) 2.check it the input voltage is same as the main volta…