Aqua Medic Turboflotor multi SL Operation Manuals

4, Aqua Medic Turboflotor multi SL 4 4. Set-up The Turboflotor multi SL is a skimmer, that can be set up in various ways: 1. As an external skimmer, directly mounted on the aquarium: “Hang on”, (fig.3) 2. For use in the cabinet with a sump or under tank filter system (fig.4) - next to the filter tank - in the fi…

2, 2 1. Product description The Turboflotor multi SL consists of the following parts: - Foam cup, cover and reaction-pipe - a venturi pump Ocean Runner pH 2500 inclusive Needle wheel - outflow box – 2 pieces. 2. Parts of the Turboflotor multi SL 1. lid for foam cup 2. foam cu…

5, 5 14 13 9 1 2 5 6 11 1 0 8 15 16 17 Fig.4: Turboflotor multi SL, Hang on, tilted at 5º The skimmer is now ready for use and can be started. Set up: beside or inside the filter tank of a sump or under tank filter system The Turboflotor multi SL can also be used in a sump or under tank…

1, 1 Operation Manual for the Turboflotor multi SL Motor driven skimmer for saltwater aquaria up to 1000 l. In purchasing this unit you have selected a top quality product. It has been specifically designed for aquarium use and has been tested by experts. This unit will efficiently remove t…

6, 6 Numbers see Fig. 1 18. filter tank 19. re-circulation pump 20. overflow chamber 21. Return flow into the aquarium Fig.5: Turboflotor multi SL, set up adjacent to the filter tank of a sump or under tank filter 5. Starting / Performance The system can be started when the Turboflotor is corr…

7, 7 5. Problems Adjustments: Due to the construction, air and water mixing is automatic, but you can increase the amount of air and water by removing the grey reduction piece from the suction side of the pump. Normally no adjustment is required but it may be necessary to alter th…