AmTryke 1412 Assembly Instructions Manual

1, Revised Date: 11/04/08 Page 1 of 12 Amtryke® ProSeries Model #1412 50-FC-1412 Tools Needed for Assembly 8 mm Socket or Wrench 10 mm deep well socket or wrench 13 mm Socket or Wrench 14 mm Socket or Wrench 15 mm Socket or Wrench Needle Nose P…

8, Revised Date: 11/04/08 Page 8 of 12 7) BASKET ASSEMBLY a) Bars at rear of basket mount onto bracket at back of tryke. Two screws and nuts (black) can secure basket if rider desires permanent attachment. 8) PEDALS NOTE: there is a right and left pedal indi…

2, Revised Date: 11/04/08 Page 2 of 12 NOTE: THE SEAT POST ASSEMBLY MAY BE MOUNTED IN TWO (2) POSITIONS ON THE FRAME. THIS ALLOWS DIFFERENT POSITIONING BASED ON THE RIDERS SIZE. THE SEAT COMES MOUNTED IN THE BACK SET OF HOLES FROM THE FACTORY. a. Location of the se…

6, Revised Date: 11/04/08 Page 6 of 12 4) BRAKE LEVER INSTALLATION a) Mount hand brake lever to comfortable position on the handlebars for your rider. Trim foam grip to allow clearance for desired brake position. b) Open the brake lever and place the nipple end of the brake c…

9, AmTryke 1412 Revised Date: 11/04/08 Page 9 of 12 9) STEERING PIN INSTALLATION a) The steering inserts into the front fork tube from the side. b) The top position locks the steering straight. This allows for easy transfer or if the child needs assistance with learning to ste…