Amprobe ACD-14 TRMS-PLUS Instruction Manual

6, 5 meter will show close to zero reading when the inputs are shorted. Open input is actually a floating condition, which is not a zero-volt-input condition. Note: Hz input sensitivity varies automatically with function range selected while activating the Hz function. Lowest range h…

11, 10 Auto-ranging When there is more than one measuring range under a selected meter function, the LED annunciator “a” turns on in the upper left corner. The meter will automatically switch to the best resolution range when making measurements. No manual ranging selection is required. A…

13, 12 6) Specifications General Specifications Display: 3-3/4 digits 4000 counts, dual LCD displays Update Rate: 3 per second nominal Polarity: Automatic Low Battery Indication: Below approx. 2.4V Operating Temperature: 32 ° F to 104 ° F (0 ° C to 40 ° C) Relative Humidity: Maximum …

14, Amprobe ACD-14 TRMS-PLUS 13 E.M.C.: Meets EN61326(1997, 1998/A1), EN61000-4-2(1995), and EN61000-4-3 (1996) In an RF field of 3V/m: Capacitance function is not specified µ A function: Total Accuracy = Specified Accuracy + 65 digits Other function ranges: Total Accuracy = Specified Accuracy + 45 digits Perfo…

7, 6 Ω Resistance, and Continuity functions Inputs are made through the test leads terminals. Move the slide-switch to the “ Ω ” position. The unit defaults at Ω . Press SELECT button momentarily to select Continuity function, which is convenient for checking wiring connections and…