Amprobe CT-326-C Operation & User’s Manual

4, Limited Warranty and Limitation of Liability Your Amprobe product will be free from defects in material and workmanship for one year from the date of purchase unless local laws require otherwise. This warranty does not cover fuses, disposable batteries or damage from accident, neglect, mis…

5, 3 P26 Receiver 1) Probe tip 2) LED bar-graph indicator 3) Battery status check 4) Range switch 5) ON test mode: Push and hold to test 6) Battery test: Push and hold to check battery status 7) Earphone jack 8) Battery compartment T300 Transmitter 1) LED indicator 2) Fuse compartm…

16, Amprobe CT-326-C 14 5. Press the probe’s “ON” button and wait for it to calibrate. 6. Place the tip of the receiver to the grounded side of the transmitter. The receiver should indicate a full scale reading of 10 LEDs. If the receiver does not indicate this, the voltage that is being applied will …

19, 17 Troubleshooting the Current Tracer To test the operation of the transmitter, connect it to a known power source from 6 to 300 V ac/ dc. The LED should begin to blink at a steady rate of approximately 71 times per minute. If it does not blink, checks to ensure that there is proper…

3, English CT-326-C Current Tracer Users Manual P/N 2757388 Rev 002 11/2013, 6001572 A © 2013 Amprobe Test Tools. All rights reserved. www. .com [email protected] …