Ambirad VSXE20UT Manual, Assembly, Installation & Servicing

18, 18 Figure 8. Vision Heater Assembly: Models VSXE U tube 35/40/45kW. SEE FIGURE 1 SEE FIGURE 1 FIGURE 1 FIGURE 3 FIGURE 2 …

24, 24 4.6 Combustion Fan Assembly Powered Burner Step 1 Slacken jubilee clip and remove the flexible hose from the burner. Step 2 Remove fan spigot fixings. Step 3 The combustion fan can now be detached. Step 4 Remove the fan orifice plate spinning. Step 5 Inspect the…

29, 29 7.3 Gas Valve Replacement Step 1 Remove the burner assembly as described in the section 4.3 Servicing. Step 2 Open the left hand access door and detach the impulse hoses from the air pressure switch. Step 3 Remove the 4 screws holding the burner head onto the …

6, 6 to the heater not to apply excessive turning force to the internal controls. A flexible hose is installed to allow safe linear expansion of the heater without creating undue stress on the gas supply pipe work. It is therefore important that a tested and certified hose assem…

26, Ambirad VSXE20UT 26 Required Spares In order to aid troubleshooting and servicing we recommend that the components shown in this section should be stocked. Note Any spare part components that are not approved by AmbiRad could invalidate the approval of the appliance and validity of the warranty. 5. …