Altair 55030 Operation & User’s Manual

13, 32 www.humancaregroup.com Lifting height The lifting height corresponds to the difference between the highest and lowest position the lift can reach. This corresponds to the length of the lift belt. The length of the lift belt is 1680 mm (66.1”) If you want to extend the lift belt th…

5, 24 www.humancaregroup.com Product description 1. Hand control 2. Lift belt 3. Telescopic bar 4. Leg hook 5. Secondary control panel 6. Emergency lowering button 7. Indicator 8. Emergency stop ENG 1 2 3 8 7 6 5 4 …

7, 26 www.humancaregroup.com Functions Emergency stop In an emergency, the emergency stop can be activated by pressing the RED button. To reset the emergency stop, turn the RED button clockwise. Emergency lowering In event of an emergency the emergency low- ering function can be used. Press …

16, Altair 55030 www.humancaregroup.com 35 Guidance and manufacturer’s declaration – electromagnetic emissions The Human Care lift is intended for use in the electromagnetic environment specified below. The customer or the user of the Human Care lift should assure that it is used in such an environmen…

3, 22 www.humancaregroup.com Before using for the first time, make sure that: • you have read and understood the user manual for the lift and all of its accessories • the lift has been installed in accordance with the installation instructions • the lift accessories are intended for us…

9, 28 www.humancaregroup.com Hand control The hand control is equipped with an Up button (1) and a Down button (2) for raising and lowering the lift. When the lift is loaded with less than approx. 40 kg it can be run at two speeds. If the Up or Down button is pressed for longer …