Alaris S2050 Operation & User’s Manual

61, A-61870 July 2017 53 5 Troubleshooting Calibrations Scanner multifeed calibration should be done only when Alaris Technical Support personnel tell you to calibrate. The touch screen of the S2060w/S2080w scanners can be calibrated. Again, this calibration should be performed only if…

16, 8 A-61870 July 2017 1 Overview Inside view 1 Paper present sensor — detects the presence of paper in the input tray. 2 Transport rollers — (three pairs) these six rollers, plus the two visible on the “Underside view” on page 7, help move paper smoothly through the scanner. 3 Multife…

42, Alaris S2050 34 A-61870 July 2017 3 Scanning Multifeeds A multifeed is more than one page passing through the imaging area together. It results in either one or more images that are not captured, or an image that combines content from more than one page. Detecting multifeeds during scanning A…

15, A-61870 July 2017 7 1 Overview Underside view 1 Tilt stand leg — recessed into scanner base. 2 Tilt stand leg — fully extended to lift front edge of scanner — assists output of long pages. NOTE: In operation, either recess or fully extend both legs. 3 Transport rollers — (one pair) …

12, 4 A-61870 July 2017 1 Overview Scanner components Front view This illustration shows the S2050/S2070 model scanners.The scanner screen and buttons differ in the S2060w/S2080w models, as illustrated below. 1 Input tray — the input tray holds up to 80 pages of A4 80 g/m 2 paper and c…

71, A-61870 July 2017 63 Appendix B Warranty — US and Canada only Congratulations on the purchase of an Alaris Scanner. Alaris Scanners are designed to provide end users with the highest performance and reliability. All Alaris Scanners are covered by the following Limited Warranty. Limited Warran…