Alan HP106 Operation & User’s Manual

9, 6 Part names and their functions 3 Part names and their functions We recommend to have a look to this section in order to familiarize with the transceiver’s main parts and controls. Numbers in brackets refer to the images. 3.1 Top [1] Antenna connector (MX thread type). Fit th…

14, Basic operations 11 5.2 Adjusting volume With the device turned on, rotate the PWR/VOL knob clockwise to increase the volume or counterclockwise to reduce it. For a normal use we suggest to keep it to the middle position. 5.3 Channel selection If your radio has been programmed with more than …

10, Part names and their functions 7 3.2 Front [5] Speaker. The built in speaker located in this point emits the reception sound. [6] Microphone. Your voice is detected by the microphone located in this place. 3.3 Side (left and right) [7] Accessory connector (under the cover cap). To con…

24, Quick reference 21 10 Quick reference 10.1 Operation resume If you are now familiar with your transceiver, you can quickly use its functions making reference to this useful summary table:  This table is only a simple reminder. The manual should be read carefully before using the radio an…

19, 16 Advanced operations reception of a correct CTCSS/DCS signal, with CTCSS/DCS incor- rect, etc.). For details about the BCLO operation please refer to the paragraph 5.6.b 7.2 Handsfree transmission (VOX) VOX (Voice Operated eXchange) is a device that allows you to automati- cally s…

8, Alan HP106 Safety first 5 2.3 Safety Your ALAN HP106/HP406 handheld transceiver has been carefully desi- gned to give you years of safe, reliable performance. As with all electrical equipments, however, there are a few basic precautions you should take to avoid hurting yourself or damaging th…