Shopsmith DustCollector Manual 

10, Dust Collector 330002 Page 10 17. Use suitable pliers to bend a tab over the clamp nut (4) toward the housing. Crimp both the tabs flat in order to hold the rack (3) and clamp to the strap. (See Figure 7.) 18. Install the filter hood (1) over the main housing (5) so that the hemmed botto…

9, Page 9 330002 Dust Collector 5. Attach the legs to the base pan (47) with four screws (41), lock washers (42) and nuts (43). Hand tighten all eight fasteners. Install the Rear Wheels 6. With the Dust Collector still on its side, install the rear wheels, by inserting a re- tainer (44…

4, Dust Collector 330002 Page 4 Introduction/Safety Dust Free Woodworking The Shopsmith Air Filtration System provides an efficient and effective means to collect wood shavings and dust from the workshop. Unlike conventional shop vacuums, the Dust Collector is designed to collect and filter the large …

2, Dust Collector 330002 Page 2 Parts List 29 518393 Retaining Strap Assembly ................... 1 30 300006 Bag, Package of 6 ................................... 1 31 514831 Hex Head Cap Screw, ¼-20x1-3/8” ...... 4 32 120380 Spring Lock Washer, ¼” ...................... 4 33 514896 Rear Han…

5, Page 5 330002 Dust Collector • Do not leave the tool running unattended. Turn power off. Don’t leave tool until it comes to a complete stop. • Avoid unintentional starting. Make sure the switch is in the “off” position before plugging in or unplugging the tool. dust and shavings in…