AGFA CR 10-X Operation & User’s Manual

27, Type label Date of manufacture Manufacturer Serial number WEE Symbol, see section about Environmental protection. This mark indicates how to insert the cassette in the slot, depending on the cassette size that is indicated in the mark (CR 15-X only). Safety Instructions for Laser Products …

5, Introduction Topics: • Introduction to this Manual • Introduction to CR 10-X, CR 12-X and CR 15-X CR 10-X, CR 12-X, CR 15-X | Introduction | 5 2491E EN 20150409 1543 …

79, Remarks for HF-emission and immunity Remarks for HF-emission and immunity It is hereby certified that the digitizer has interference suppression according to the EN 55011 Class A as well as the FCC Rules CR47 Part 15 Class A. This device was tested for a normal hospital environment …

17, AGFA CR 10-X System Documentation The documentation shall be kept with the system for easy reference. Technical documentation is available in the product service documentation which is available from your local support organization. The user documentation consists of: • CR 10-X, CR 12-X, CR…

23, Connectivity The digitizer is connected to the workstation via Ethernet connection and uses the DICOM protocol to communicate with the workstation. CR 10-X, CR 12-X, CR 15-X | Introduction | 23 2491E EN 20150409 1543 …

22, Equipment Classification This device is classified as following: Table 1: Equipment classification Class I equipment Equipment in which protection against electric shock does not relay on basic insulation only, but includes a power supply cord with protective earth conductor. For earth reli…