Adamson E12 Operation & User’s Manual

38, Page 38 4.0 Ground Stacking Legs Ground Stacking 1. Make sure all wheel locks are engaged and the dolly is situated where the design has specied. 2. Insert stacking leg into rectangular chamber directly above the dolly wheel. (Fig. 1) E-Series | Ground Stacking Conguration Fig. 1 Fig.…

15, Page 15 2.2 Configuration Example System Conguration E12 | System Conguration This example conguration demonstrates the efciency of the system. For further information re- garding congurations, please refer to the Adamson Document E-Series Conguration Brochure. …

8, Page 8 1.3 E15 Spec Sheet E15 The Adamson E15 is a 3 way, true line source enclosure, incorporat- ing proprietary transducer and waveguide technology which reduc- es weight and minimizes the footprint. The heart of the E15 is the E-Capsule, which is precisely engineered and constructed of ligh…

27, Adamson E12 Page 27 3.4 Rigging Sticker Legend Rear Autolock Rigging Sticker Legend * When releasing and pulling the system apart (to enclose rigging bars) let knob slide down to ‘rest’ position (green), and place attached push pin to green slot (above) If you’re dividing into 4 stacks, pe…

26, Page 26 3.3 Front Rigging Front Autolock Rigging - Black Lever There is only 1 mode of use for the black lever: The lever is pulled out and parallel to the ground in temporary ‘Open’ mode (Fig. 1)- this releases the rigging bars from inside the enclosure. The lever snaps back into place re…

39, Page 39 Truck Pack 5.0 Possible Congurations The E-Series system has been designed to t standard truck widths in several different congu- rations. This section shows some of the options. 76.5" 99.4" 45" 63.8" 92.9" 45.3" 2.5m 1.9m 99.4" 2.5…