ACT ACTpro 1500 Operating & Installation Instructions Manual

2, Operating & Installation Instructions This manual refers to the ACTpro 1500 and 1520 controllers, The controllers are Single doors IP controllers expandable to 32 doors using the ACTpro 100e single door station or the ACTpro 120 single door station with a 12 V DC 2 amp power supply. Acc…

14, ACT ACTpro 1500 ACTpro 1500 and 1520 Operating and Installation Manual Page 14 6.0 Hardware Installation Guide 6.1 Readers Diagram 7: Wiring of entry & exit readers. Reader terminal block Recommended wiring colour Signal information SENSE White For Entry re…

35, ACTpro 1500 and 1520 Operating and Installation Manual Page 35 22.0 Troubleshooting 22.1 Unknown Card The card has not been assigned on the system. 22.2 Access Denied Make sure the User is enabled and has appropriate access rights. 22.3 Door Offline Ensu…

15, ACTpro 1500 and 1520 Operating and Installation Manual Page 15 6.2 Push Button (PB) Push button is connected between PB input and 0 Volts. When push button is pressed the main relay is be activated for the configured time. Diagram 8 Push button is also referred to as Exit B…

20, ACTpro 1500 and 1520 Operating and Installation Manual Page 20 9.4 Set controller Date and Time Step 1: Login under the user account Step 2: Select setting option (top-right of screen) Step 3: Select “Date and Time” tab. Step 4: Enter correct date and time …

25, ACTpro 1500 and 1520 Operating and Installation Manual Page 25 12.3 Create a User group. Select “User Groups” menu and choose available user group Assign a unique name to the user group (e.g. Finance department, Cleaners) Enable user group Assign do…