Corsair Dominator Operation & User’s Manual

1, Corsair Dominator Performance Hardware User’s Guide Version 1.0 February, 2010 R e m o v i n g D o m i n a t o r DHX- 2 C o o l i n g F i n s An illustrated step-by-step guide to removing the cooling fins from Dominator and Dominator GT DDR3 memory modules. …

2, Removing Dominator Cooling Fins 1 Dominator and Dominator GT Removable Fins Dominator and Dominator GT DDR3 memory modules are made using DHX-2 features, a revision of our original DHX cooling technology. One of the primary improvements is the use of removable cooling fins. The fi…

3, Removing Dominator Cooling Fins 2 Removing the Cooling Fins The cooling fins are attached using 3 screws. You will need a 3/32” hex key or allen wrench to remove these screws. …

4, Removing Dominator Cooling Fins 3 Remove the 3 Screws Use the hex key to turn the screws counter clockwise. Once all 3 screws are removed, the cooling fin will come off. …

5, Removing Dominator Cooling Fins 4 Once the cooling fins are removed, the modules are ready for the installation of upgraded cooling fins or custom cooling solutions. The grey material on the top of the heat sinks is thermal interface material or TIM. This is a thermally conductive material …

6, Removing Dominator Cooling Fins Resources Corsair Dominator and Dominator GT memory specifications can be found here: http://www.corsair.com/products/memory_home.aspx Additional information on the Corsair H-30 memory cooler can be found here: https://shop.corsair.com/store…