CS CAVILOCK CL400 Magnetic Installation Instructions And Operators Manual

P:\INSTALLATION INST\Electrified Lockset\INST-Z7800 REV D 10-13 Page 1 Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email [email protected] A. Door Preparation:1. Measure desired height from fini ...

Model & Doc Type: Z7800 Series 7

Instructions for Installing 6500 Bored Locks(See reversed Side for Installing 6500 Series Dummy Trim) FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 / www.sargentlock.comCopyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reprod ...

Model & Doc Type: Sargent 6500 2

opened. If power fails the strike will remain locked. cam into the unlocked position allowing the door to be E) Reinstall strike in frame. D) Reposition strike and re-tighten cap screws. Cap screws. C) Loosen the two (2) 12-24 x 3/8 Hex Washer Head B) Remove strike from fram ...

Model & Doc Type: ES 110-4 Series 7

*P516-769*P516-7691 Check dimensionsIf door and door jamb dimensions do not match, go to www.schlage.com for drilling instructions or refer to the enclosed template.Door JambB\,” (16 mm) deepM\,” (22 mm)1Z\," (29 mm)2C\,” (60 mm)OR2C\v” (70 mm)1” (25 mm)Hole4Z\,” (105 mm ...

Model & Doc Type: LT Series 8