RCI 8310 Installation Instructions Manual

4, Specifications MECHANICAL ( Including 1/4” [6.4mm] mounting bracket) : 8310 Lock Dimensions: 1 5/8”D x 2 7/8”W x 10 1/2”L (41mm x 73mm x 268mm) 8320 Lock Dimensions: 1 5/8”D x 2 7/8”W x 21”L (41mm x 73mm x 533mm) 8330 Lock Dimensions: 1 5/8”D x 2 7/8”W x 34 1/2”L …

7, ©2007 RUTHERFORD CONTROLS INT’L CORP. WWW.RUTHERFORDCONTROLS.COM USA: 2697 INTERNATIONAL PARKWAY, PKWY 5, VIRGINIA BEACH, VA 23452 • CANADA: 210 SHEARSON CRESCENT, CAMBRIDGE, ON N1T 1J6 PHONE • 1.800.265.6630 • 519.621.7651 • FAX: 1.800.482.9795 • 519.621.7939 • E-MAI…

6, Product Accessories Guide Continued Used for traffic control applications where two doors are to be used with a single 8310 lock. The Split Armature plates are half the length of a standard armature. Each of these is mounted on one of a pair of doors with an 8310 lock centered on …

3, 8310, 8320, 8330 & 8340 Electromagnetic Lock Installation Instructions (Continued) 3 Lock Assembly The 8310 and 8320 Electromagnetic Locks come with screws installed in the housing. These screws, when in place, inhibit the insertion of an Allen wrench into the mounting screw ope…

1, ©2007 RUTHERFORD CONTROLS INT’L CORP. WWW.RUTHERFORDCONTROLS.COM U SA: 2 69 7 INTERNATIONAL PARKWAY, PKWY 5, VIRGINIA BEACH, VA 23452 • CANADA: 210 SHEARSON CRESCENT, CAMBRIDGE, ON N1T 1J6 P HON E • 1.800.2 65.663 0 • 5 19.621.7651 • FAX: 1.800.482.9795 • 519.621.7939…

2, RCI 8310 3. Once wiring has been routed into the lock cavity, connect wire to terminal blocks as shown in Fig. 1. If optional SCS and/or DSS features are being used these can also be wired at this time as shown in Fig. 1. 4. Delayed Relock Feature - Should the built-in delayed relock feature be required…