Razorweld JRW200AC/DC Operating Manual

4, 4 SAFETY Welding and cutting equipment can be dangerous to both the operator and people in or near the surrounding working area if the equipment is not correctly operated. Equipment must only be used under the strict and comprehensive observance of all relevant safety regulatio…

16, 16 Razor2OOAC/DC TIG-ARC Razorweld Razorweld ™™ ™ ™ Continued - Set Up Procedure for ARC (Stick) Weld- 6) Connect the Earth Clamp securely to the work piece or the work bench. 4) Place the electrode into the electrode holder and clamp tight. 5) Strike the electrode against the …

30, 30 Razor2OOAC/DC TIG-ARC Razorweld Razorweld ™™ ™ ™ Set up and operation for AC PULSE TIG Welding The Razorweld 200ACDC machine has digital Pulse Frequency Control. All the parameters for AC Pulse TIG welding - Peak Amp, Base Amp, Pulse Frequency and Pulse Width are easy…

10, 10 Razor2OOAC/DC TIG-ARC Razorweld Razorweld ™™ ™ ™ Front Panel Operation Indicates Active Selector Pad AC TIG: Select by pushing the selector pad to cycle through to illuminate the AC icon. DC ARC: Select by pushing the selector button to cycle through to illumina…

31, Razorweld JRW200AC/DC 31 Razor2OOAC/DC TIG-ARC Razorweld Razorweld ™™ ™ ™ Remote Amperage Control Operation Procedure amperage adjustment on/o switch Type: UER1MS-10H Connection and operation of the remote hand control 1. Connect the remote control 5 pin plug from the TIG Torch switch le…