Monte Carlo Fan Company AC-552 Owner's Manual And Installation Manual

4, © 2011 Monte Carlo Fan Company 5/5/2012 4 Hang assembled fan from the mounting br acket installed to ceiling in previous steps. Mak e sure the fan is hanging str aight. Rotate fan until the tab on the Mounting br acket engages the slot on the Downrod Ball. This must be done to prevent the …

8, © 2011 Monte Carlo Fan Company 5/5/2012 8 1.Check main and branch circuit fuses or circuit break ers. 2.Check line wire connections to fan and switch wire connections in switch housing. CAUTION: Make sure main power is turned off. 3.Make sure forward/reverse switch is firmly in up or down posit…

5, © 2011 Monte Carlo Fan Company 5/5/2012 5 Place the switch cap over the light kit until the threaded rod is completely through. 26 Remove the plastic insert from the center of the switch cap . 25 Attach switch cap to fan b y lining up 4 screw holes and installing the 4 screws remo…

7, © 2011 Monte Carlo Fan Company 5/5/2012 7 36 Align the hole in glass with hole in final cap to allow the fan speed con- trol pull chain to pass through. Install finial and tighten in direction of arrow. …

3, Monte Carlo Fan Company AC-552 © 2011 Monte Carlo Fan Company 5/5/2012 3 Before you begin installing the fan, S witch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prom…