Rane RPM 26 Operator's Manual

21, Manual-21 HINTS FOR WINDOWS 95 USERS If you find yourself squeezed for room at the bottom of the screen, you can modify the Task Bar so it only appears when you move the mouse pointer below the bottom of the screen. To do this, Right-Click on a blank spot on the task bar. Select Prop…

4, Rane RPM 26 Manual-4 SOFTWARE OPERATION STARTING RANEWARE If RaneWare has not yet been installed on your computer, refer to STEP BY STEP RANEWARE INSTALLATION above. Once the software is installed, a RaneWare Program Group is created with four icons. One icon each for the RaneWare application, Hel…

20, Manual-20 In addition to the individual signal processing blocks described above, the RPM 26 contains Input Blocks and Output Blocks, shown above. These terms simply describe a subset of the available processing blocks and allow conve- nient copying of settings from multiple processing blocks. For…

19, Manual-19 THE OVERALL RESPONSE CURVE Double-clicking on any output’s screw terminal (shown at the right) opens the Overall Response curve window (shown below). The displayed curve(s) display the frequency response contribution of the equalization settings currently active in the RPM…

10, Manual-10 THE RANEWARE BUTTON BAR This Button Bar appears at the top of every RW 232 product’s screen. The 16 numbered buttons immediately recall the indicated memory number from the connected RW 232 product. The most recently recalled memory is indicated by the red memory number to the…

5, Manual-5 only a few presets are required, deleting the name entry in the Site Control Panel Setup removes the button from the Site Control Panel, reducing the number of buttons. A password is not required to operate the RPM from the Site Control Panel. If more than 16 memories are nee…