White Rodgers 1F95W-80 Operation Manual

5, White Rodgers 1F95W-80 5 Before you begin programming your thermo- stat, you should be familiar with its features and with the display and the location and operation of the thermostat buttons. The information in this section will help you become familiar with your new thermostat so that you can easily program i…

12, 12 OPERATING FEATURES Now that you are familiar with the thermostat display and buttons, read the following informa- tion to learn about the many features of the thermostat. • COMPUTED ENERGY MANAGEMENT RECOVERY (EMR) — The thermostat’s microcomputer automatically calculates the time …

26, 26 same program you set for Monday. You may also choose to use the HOLD COPY button to copy any day’s heating and cooling program into any other day’s program (see USING THE COPY BUTTON). 8. To enter Tuesday’s through Sunday’s heat- ing programs, use the HOLD COPY button…

8, 8 The Display 1 Continuously displays system mode (HEAT, OFF, COOL, AUTO, HOLD). During pro- gramming, the day of the week is displayed (MO, TU, WE, etc.). 2 Alternately displays room temperature (F denotes degrees Fahrenheit and C denotes degrees Celsius) and time of day (A de- notes AM time…

13, 13 position (see figure below). Remove the battery for at least two minutes, to allow the thermostat to reset itself. Replace the bat- tery and put the thermostat back on the wall. Press SYSTEM HEAT - OFF - COOL - AUTO until the desired operating mode is displayed. EMR (ON) Switch #1 set at inst…

27, 27 Enter Cooling Program If outside temperature is below 50°F, we recommend that you remove the thermo- stat from the wall before proceeding with the following steps to program cooling temperatures. Personal injury or prop- erty damage may occur due to air condi- tioner compressor slugg…