RuggedCom RUGGEDBACKBONE RX5000 Operation & User’s Manual

58, 2. System Administration ROX™ v2.2 User Guide 58 RuggedBackbone™ RX5000 2.10. Deleting Log Files Figure 2.43. Delete-logs menu To delete log files, click the Perform button on the Delete Log Files form. This form is accessible at admin/delete-logs. Figure 2.44. Delete Log Files…

312, 30. Tunnelling ROX™ v2.2 User Guide 312 RuggedBackbone™ RX5000 Modpgroup. There are right side and left side IPsec forms. The forms for each side are used for IPSec system settings on each side. The forms are the same for both sides, so only the left side forms are shown here. F…

79, 5. IP Network Interfaces ROX™ v2.2 User Guide 79 RuggedBackbone™ RX5000 Figure 5.4. Explicitly Adding a VLAN Interface to a Switched Port Procedure 5.1. Explicitly Adding a VLAN Interface at switch/vlans/static-vlan 1. Go into Edit Private mode. 2. Navigate to switch/vlans/static-vlan.…

153, 16. Ethernet Ports ROX™ v2.2 User Guide 153 RuggedBackbone™ RX5000 16. Ethernet Ports ROX™ Ethernet port control provides the following features: • Configuring port physical parameters. • Configuring link alarms/traps for the port. • Configuring port rate limiting. •…

146, 15. DHCP Server ROX™ v2.2 User Guide 146 RuggedBackbone™ RX5000 Figure 15.11. Lease Configuration form default Synopsis: integer Default: 600 The minimum leased time that the server offers to the client maximum Synopsis: integer Default: 7200 The maximum leased time that the server offers …

208, RuggedCom RUGGEDBACKBONE RX5000 22. Multicast Filtering ROX™ v2.2 User Guide 208 RuggedBackbone™ RX5000 Figure 22.1. IGMP Operation Example 1 In this example, the general membership query sent to the C1-C2 segment is answered by a membership report indicating the desire to subscribe to a stream …