Peak Beam Systems MAXA BEAM MBS-410 Operation Manuals

7, 6 Explanation of Programming Symbols: (A) Changing High Beam from Momentary to Timed and Continuous Modes: Factory default activates high beam when the 4-way switch is held to the right. To change function to timed high beam mode follow the below s…

5, 4 Searchlight Operation 1. Locate searchlight, battery and power cable. 2. Attach Searchlight to Battery by lining up the four feet of the searchlight over holes in top of battery (a). Lower the searchlight into the holes, then slide the searchlight towards the co…

13, 12 Searchlight Maintenance For best performance, clean the searchlight’s front lens with window cleaner or rubbing alcohol. Periodically wipe down the body of the searchlight with a damp cloth, especially in marine environments where the housing is exposed…

16, 15 3. To remove an intact lamp from the socket, grasp the metal end of the lamp and pull straight out with a slight twisting motion. Do not put any side-to-side pressure on the lamp. To remove a lamp that is broken inside of the front cavity, tip the searchli…

3, 2 Overview Characteristics Maxa Beam Searchlights are lightweight, compact, high intensity illuminators that use a field replaceable Xenon short arc lamp and a precision electroformed reflector to provide the ultimate solution for long range, portable and remote-controllable…

19, Peak Beam Systems MAXA BEAM MBS-410 18 Input Power Requirements Please contact Peak Beam Systems, Inc. if you would like assistance sourcing an appropriate AC power supply for your searchlight: 1-610-353-8505 / [email protected]. 12VDC Input Searchlight Systems: MBS-410 Series, MBS-430-W/-Y Series, M…