UTC 263B-CO-OEM Operation & User’s Manual

4, UTC. All Rights Reserved. 4 P/N 0000000 – Rev. A – 06 Nov 12 is operating properly, you will hear four quick beeps, followed by 5 seconds of silence, followed by four quick beeps. E. At the control panel, exit sensor test mode. This test mode does not test communication…

3, UTC. All Rights Reserved. 3 P/N 0000000 – Rev. A – 06 Nov 12 D. Slide the product body back onto the mounting plate. Note: The mounting plate will not close if all three batteries are not installed. Sliding the alarm on the mounting plate E. Perform a sensor/RF test wit…

8, UTC. All Rights Reserved. 8 P/N 0000000 – Rev. A – 06 Nov 12 Important warning statements This carbon monoxide alarm is designed to detect carbon monoxide from ANY source of combustion. It is NOT designed to detect smoke, fire, or any other gas. WARNING: Carbon mon…

1, UTC 263B-CO-OEM UTC. All Rights Reserved. 1 P/N 0000000 – Rev. A – 06 Nov 12 263B-CO-OEM Carbon Monoxide Alarm Product Introduction This wireless carbon monoxide (CO) Alarm (product) monitors the levels of CO gas and gives early warning when potentially dangerous levels exist. It does not detect …

2, UTC. All Rights Reserved. 2 P/N 0000000 – Rev. A – 06 Nov 12 o Do not install near vents, flues, chimneys, or any forced/unforced air ventilation openings. o Do not install on metal surfaces. o Avoid mounting in areas with a large quantity of metal or electrical wires. …

7, UTC. All Rights Reserved. 7 P/N 0000000 – Rev. A – 06 Nov 12 The device complies with part 15 of the FCC Rules as well as Industry Canada Rules and Regulations license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause h…