Thermo King TriPac Envidia Installation Manual

41, 39 D2/D4 Heater Installation (continued) Exhaust and Combustion Air Intake Routing IMPORTANT: Correct installation of this heater is necessary to ensure safe and proper operation. BEFORE installing the heater, thoroughly read and understand the heater manufacturer’s manual included with the…

37, Thermo King TriPac Envidia 35 A/C Hose Installation (continued) #4 Liquid Line from Drier Outlet #6 Discharge Line from Condenser Figure 16:A/C Hose I.D. and routing shown …

46, 44 Battery Box Harness Installation IMPORTANT: Before making any electrical connections, confirm the battery cables in the TriPac Envidia battery box and truck battery box are not connected to the batteries. NOTE: Excessive communication harness length should be doubled up and secured wi…

44, 42 A/C Duct Installation A/C Vent Locations The evaporator is equipped with two air discharge outlets to attach the supplied flexible air ducts. The ducts will be attached to plastic air vents that should be located and installed to provide maximum air circulation in the sleeper. Sugg…

28, 26 Condenser and Receiver Drier Installation Sub-Assembly IMPORTANT: Keep all the A/C fittings capped and sealed until the installation of the refrigeration hoses. Refrigerant oil is extremely hygroscopic and a system left open for more than 5 minutes may require extensive evacuation …