uAttend CB1000 Quick Start Manual

3, Page 3 of 7 2. Time Clock Setup Before we begin linking your time clock to uAttend’s trackmytime.co.uk, you’ll need to ensure that the CB1000 is plugged into a power outlet and connected to your local area network using the included network cable (or one you provide). You should still…

6, Page 6 of 7 Error Message Notes 5. Mounting Instructions Step 1: Either attach the wall plate to the wall using the holes and screws provided, or, Fig 1 & Fig 2, attach the wall plate to the back of the CB1000 using the 4 small screws first and then install the screw…

1, Page 1 of 7 CB1000 Quick-Start Guide Contents 1. Getting Started – Signup 2. Timeclock Setup 3. Departments and Employees 4. Troubleshooting 5. Device Installation …

2, uAttend CB1000 Page 2 of 7 1. Signup Thank you for purchasing the CB1000 Time Clock, which is part of the A2T uAttend Employee Management System. You’ve made an excellent choice - now let’s get started! We’ll guide you through the signup process in a few convenient steps. The signup process is design…

7, Page 7 of 7 Step 2: If you have attached the back plate to the terminal then install the longer screws and plastic anchors on the wall or surface on which the CB1000 will reside. Make sure there is a power outlet and LIVE Ethernet port nearby. Ensure the screws are installed a…