REMOVU R1+ Technical Training Manual

2, 1. Product Information 1.1 Introduction The REMOVU R1+ is a waterproof remote controller with a live playback video feed designed to work with GoPro cameras. Record, stop, play, or even change your GoPro settings and modes all on one device. The REMOVU R1+ perf…

4, 1440 / 60 / W OK 720 / 240 / N No 1440 / 48 / W OK 720 / 120 / W No 1440 / 30 / W OK 720 / 60 / W OK 1440 / 24 / W OK 720 / 30 / W OK 1080 / 120 / W No 720 Super / 120 / W No 1080 / 90 / W No 720 Super / 60 / W OK 1080 / 60 / W OK WVGA / 240 / W…

10, If you are running a version that is LOWER than 1.1.0 (i.e. 1.0.5) you MUST update your R1+ to version 1.1.0 BEFORE updating to version 1.2.1. Step2. In the r1+_110.zip file you will notice there are 2 different files, after extracting both of them, you MUST put BOTH of the files into t…

9, REMOVU R1+ d. My R1+ shows “PREVIEW NOT SUPPORTED” when I connected with my HERO5. - Streaming a high frame in a wireless environment will cause the video to be severed. The GoPro Capture App also does not seem to support streaming high frames in a wireless environment due to hanging issues.…

7, 3. Troubleshooting 3.1 Connecting the R1+ to a GoPro Camera To connect the R1+ to a GoPro camera, First, connect the GoPro camera to your GoPro Capture App. (HERO5 Users please make sure both Wi-Fi and Bluetooth are enabled before pairing with HERO5 Black using GOPRO Capture …

6, Q: What is the reset button used for? A: The reset button located near the USB can be used in the rare case that the R1+ stops functioning (i.e. screen freezes). To use the reset button, press and hold for 3 seconds using a sharp object. Q: Is the R1+ compatible with the Sony Action…