TelcoBridges 800 standalone series Installation Manual

35, 29 Installing the Equipment 2.5.6.2 Connecting to DC Power The 800 series gateway, DC model, is furnished with two DC power supplies. To connect an 800 Series and 800 Series +1 Unit to DC Power 1. Connect one wire from the positive terminal of the 800 series gateway to the return si…

3, iii About this Guide This guide provides installation, and setup procedures for 800 series standalone and 800 series 1+1 systems. Conventions Terminology Description 800 series gateway This term is used when a description applies to both the 800 series standalone and 800 series 1+1 system. 800 …

11, 5 Section 2 Installing the Equipment This section provides information about the following topics: • Section 2.1 “Package Contents” • Section 2.2 “Rack Mounting the 800 Series Standalone or the 800 Series 1+1 System” • Section 2.3 “Choosing your Connection Pro…

23, 17 Installing the Equipment 2.4.4 Grounding the Equipment Chassis As a standard safety practice, the chassis of the 800 series gateway must be properly grounded to protect against any contact with an electrical fault condition. It is recommended that the chassis be connected to an earth ground. …

39, TelcoBridges 800 standalone series 33 Installing the Equipment 3. Select a host from the Host Configuration List. 4. Select the Status tab. …