Reka MS 80 Product Manual

10, Never throw electric tools in the domestic waste. According to the European directive 2002/96/EC for used electric and electronic devices and according to national regulations, used electric tools must be collected separately and treated in an environmentally compatible way for re-use. Packing ma…

4, Reka MS 80 The glue applicator has been designed and fabricated in conformity with the applicable harmonized standards and additional technical specifications. So, it is state of the art and ensures maximum safety. This safety, however, can only be achieved in the operational practice, if all the necessary m…

11, Product: Hot-Melt Glue Applicator Type: MS 80 MS 200 This is to certify that the above applicators in the design marketed by us are in conformity with the following EC directives: Until 15-01-2007:73/23/EEC, from 16-01-2007: 2006/95 EC until 19-07-2009: 91/368 EEC, from 20-09-2009: 200…

6, MS 80: The device starts heating up as soon as it is plugged in. Unplug it to turn it off. MS 200: An illuminated on/off-switch indicates that the applicator is switched on. Press the switch in order to turn the applicator on or off. Minor leaking while the applicator is warming up is due to th…

2, 2 1 3 4 5 6 1 2 3 4 5 6 7 8 9 10 Product Description 1 General Safety Instructions 2 Safety Measures to be taken during Operation 3 Start-up and Control 4 Cleaning and Maintenance 6 Trouble-Shooting 7 Environmental Protection 8 Additional Information 8 EU Declaration of Conformity 9 S…