MSA MultiGard 5000 Instruction Manual

1, INSTRUCTION MANUAL MultiGard 5000 ® System Integration Modbus/TCP Gateway Option 1-800-MSA-INST or FAX (724) 776-8783 MSA International (412) 967-3354 or FAX (412) 967-3451 In Canada 1-800-267-0672 or FAX (416) 663-5908 © Mine Safety Appliances Company 2017 – All Rights Reserved Manufactured by MINE SAFETY APPLIANCES COMPANY PITTSBURGH, PENNSYLVANIA 15230 3013-1048 Rev. 0 …

2, MSA Permanent Instrument Warranty 1. Warranty – Seller warrants that this product will be free from mechanical defect or faulty workmanship for a period of eighteen (18) months from date of shipment or one (1) year from installation, whichever occurs first, provided it is maintained and used in accordance with Seller’s instructions and / or recommendations. This warranty does not apply to expendable or consumable parts whose normal life expectancy is less than one (1) year such as, but not limited to, non-rechargea…

3, 1.0 Introduction This MultiGard 5000 System Integration Manual for the Modbus/TCP Gateway Option provides the information necessary for a customer or a third party integrator to successfully connect the system onto a larger industrial network using Modbus/TCP protocol. This interface is provided by an Industrial Control Communications, Inc. (ICC) ETH-1000 Ethernet Gateway added into the MultiGard 5000 system along with an Ethernet switch. This document is intended to cover all six models of the …

4, MSA MultiGard 5000 3.0 Modbus/TCP Communication Interface The ICC ETH-1000 Ethernet gateway is configured for the appropriate Multigard 5000 system model at MSA during system assembly and test. This includes both the hardware and gateway configuration. The gateway updates itself continuously with data from the Compact Logix L24 processor using Ethernet/IP protocol via the Ethernet switch. Data then becomes available in M…

5, 4.0 Guidelines For Accessing Data Table Addresses Remember the following key items about the MultiGard 5000 System when using these tables to decide what is applicable: All Modbus data is read-only (holding register, 4X, or read input, 1X) except for the acknowledge items listed in Table 6 (force single coil, 0X). Model: 8 point, 16 point, dual 8 point, 24 point, 32 point, or dual 16 point Single or Dual: Single sequencer M…

6, setting up an end user watchdog function to monitor the communications integrity between the Multigard 5000 System and the ETH-1000 gateway. Table 1: Multigard 5000 System to ETH-1000 Communication Status Gateway Address Comments Communications Status Register: 40555 Changing Value** – Normal Stopped Value** – Failed ** This value changes from 0 to 59 and is the seconds from the processor clock buffered through the Multigard program. The …

7, MSA MultiGard 5000 Table 2: Sensor Gas Levels Point # 1 40001 40002 40065 40066 40129 40130 40193 40194 2 40003 40004 40067 40069 40131 40132 40195 40196 3 40005 40006 40069 40070 40133 40134 40197 40198 4 40007 40008 40071 40072 40135 40136 40199 40200 5 40009 40010 40073 40074 40137 40138 40201 40202 6 40011 40012 40075 40076 40139 40140 40203 40204 7 40013 40014 40077 40078 40141 40142 40205 40206 8 40015 40016 40079 40080 40143 40144 40207 40208 9 40017 40018 40081 40082 40145 40146 40209 40210 10 40019 40020 40083 40084 40147 40148 40211 40212 11 …

8, MSA MultiGard 5000 Table 3: Points 1-32 Alarm States Sensor 1 Sensor 2 Sensor 3 Sensor 4 Point # Trouble Warning Alarm Trouble Warning Alarm Trouble Warning Alarm Trouble Warning Alarm 1 14098 14099 14100 14610 14611 14612 15122 15123 15124 15634 15635 15636 2 14130 14131 14132 14642 14643 14644 15154 15155 15156 15666 15667 15668 3 14162 14163 14164 14674 14675 14676 15186 15187 15188 15698 15699 15700 4 14194 14195 14196 14706 14707 14708 15218 15219 15220 15730 15731 15732 5 14226 14227 14228 14738 14739 14740 15250 15251 15252 15762 15763 15…

9, Table 4: Flow Status Point # Sample Bypass Sample Bypass 1 18193 18257 18321 18353 2 18194 18258 18322 18354 3 18195 18259 18323 18355 4 18196 18260 18324 18356 5 18197 18261 18325 18357 6 18198 18262 18326 18358 7 18199 18263 18327 18359 8 18200 18264 18328 18360 9 18201 18265 18329 18361 10 18202 18266 18330 18362 11 18203 18267 18331 18363 12 18204 18268 18332 18364 13 18205 18269 18333 18365 14 18206 18270 18334 18366 15 18207 18271 18…

10, Table 5: Miscellaneous Address Comments System A Position: 40525 Integer value = Point # System B Position: 40526 Integer value = Point # System A Operation Mode: 40527 0 = Sampling 1 = Manual Calibration 2 = Auto-Standardization System B Operation Mode: 40528 0 = Sampling 1 = Manual Calibration 2 = Auto-Standardization Factory Defaults Forced: 18848 0 = Normal 1 = Forced! Sensor 1 Gas Level: 40529 40530 * Uncorrected, scaled…

11, Table 7: Horn & Condition Acknowledges Sequencer (A) Sequencer B Comments Horn Acknowledge: (Push Button) 08906 08941 Coil - Write (Momentary action is necessary.) Condition Acknowledge: (Push Button) 08656 08683 Coil - Write (Momentary action is necessary.) Table 8: User Configured Output (UCO) Relay Images Output # UCO#1 UCO#2 Output # UCO#1 UCO#2 1 18705 18769 17 18737 18801 2 18706 18770 18 18738 18802 3 18707 18771 19 18739 18803 …