TeeJet Technologies AEROS 9040 Operation & User’s Manual

70, TeeJet Technologies AEROS 9040 62 www.teejet.com Aeros 9040 eld computer HOME SETUP GUIDANCEFULL SCREENINTRODUCTION GNSS RATE CONTROL APPENDIXIMPLEMENT IMPLEMENT LATERAL OFFSET DISTANCE ADJUSTMENT Implement lateral offset distance is used to enter the distance from the centreline of the machine to the centre of the impleme…

102, 94 www.teejet.com Aeros 9040 eld computer HOME SETUPFULL SCREEN IMPLEMENTINTRODUCTION GNSS RATE CONTROL APPENDIXGUIDANCE Delete last marked boundary Use DELETE BOUNDARY icon to delete the last marked boundary (interior or exterior) from the current job. Press again to remove additiona…

90, 82 www.teejet.com Aeros 9040 eld computer HOME SETUPFULL SCREEN IMPLEMENTINTRODUCTION GNSS RATE CONTROL APPENDIXGUIDANCE NextRow guidance NextRow guidance* indicates where the NextRow is located, and provides guidance at row ends to the next adjacent row. When the operator marks the…

100, 92 www.teejet.com Aeros 9040 eld computer HOME SETUPFULL SCREEN IMPLEMENTINTRODUCTION GNSS RATE CONTROL APPENDIXGUIDANCE BOUNDARIES AND POLYGONS Available on any guidance screen, the Boundaries and polygons tab displays exterior boundary, interior boundary and polygon options. Mapping l…

68, 60 www.teejet.com Aeros 9040 eld computer HOME SETUP GUIDANCEFULL SCREENINTRODUCTION GNSS RATE CONTROL APPENDIXIMPLEMENT ISOBUS Sprayer settings: 1. Press UNIVERSAL TERMINAL bottom tab . 2. From the Main setup screen , select Machine . 3. Select OEM then enter the acc…

97, 89 98-05304-EN R2 Aeros 9040 eld computer HOMESETUP FULL SCREENIMPLEMENT INTRODUCTIONGNSSRATE CONTROLAPPENDIX GUIDANCE With an ISOBUS implement status module (ISO ISM) All ISOBUS rate control congurations should be setup before starting BoomPilot. Regulation mode should be “Manual”…