Performer JC26-X Assembly Manual

8, 8 Pic 10 Pic 11 Pic 12 Pic 13 7. Slide the left hand shifter wire into a cable tube and also route it along the tie rod. 8. Route the front shifter cable through the cable guide below the boom and then into the guide on the boom itself. Insert the shifte…

7, Performer JC26-X 7 Installing Pedals Performer strongly recommend the clipless pedal system to reduce leg fatigue and to avoid injury caused by feet slipping from the pedals. Grease pedal and screw in the right pedal clockwise and left pedal counterclockwise. Tighten the pedals at the base. Instal…

5, 5 Assembly Guide Frame and Wheels 1. Place the frame on the outrigger tubes. (Pic 1) 2. Attach the four boom bolts without fully tightening. 3. Attach the rear wheel to the main frame. (Pic 2) 4. Remove the nut and one spring from the quick release. Insert the quick release and re…

15, 15 WHO WILL FULFULL THIS WARRANTY Performer is solely responsible fulfilling the terms of this warranty. The individual or company selling or distributing this trike shall not be responsible for fulfilling the terms of this warranty; any work done by the seller or distributor to rep…

4, 4 Included Parts List Quick release Headrest Brake wires/ Shifter wires Chain Tools Taps for handlebar Rear derailleur Pedals Reflector Cable housing Screws Cable tie Paint Hanger Protect sticker …

14, 14 Safety Recommendations 1. Always wear an approved cycling helmet. 2. Inspect your trike before every ride. 3. Tighten any parts which may have loosened. 4. Use a flag. Trikes are very low to the ground and a flag can increase visibility. 5. The tires should be in…