Vertical SUMMIT IP Hardware Description & Installation Manual

68, Vertical SUMMIT IP Hardware Description and Installation Manual Issue 1.2 55 6.4 Line and Station Modular Jack Wiring The MBU and Interface boards determine the type and number of external network and Station connections available. Section 4 provides details on each MBU and Interfa…

73, Vertical SUMMIT IP Hardware Description and Installation Manual Issue 1.2 60 WTIB or performed through a Command Line Interface to the system. To perform the Line Test manually, 1. With power to the system OFF, set all Dip switches on the WTIB4 to the ON state. 2. Turn the system powe…

58, Vertical SUMMIT IP Hardware Description and Installation Manual Issue 1.2 45 5. MOUNTING THE KSU AND EKSU Once all option boards have been installed in the SUMMIT IP KSU and EKSU, the KSUs can be mounted. The KSUs can be desk, wall or rack mounted. While the KSUs may be desk mounted th…

96, Vertical SUMMIT IP Vertical SUMMIT IP Hardware Description and Installation Manual Issue 1.2 83 5. You can set System time and date in this page. 6. You want to change the current station number to New station number. In this page, you can change the station number. …

32, Vertical SUMMIT IP Hardware Description and Installation Manual Issue 1.2 19 4.3 Installation of Option Boards Prior to installing any option board, assure power is OFF. We recommend wearing a wrist- strap connected to a known ground. At a minimum, before touching any board dischar…

86, Vertical SUMMIT IP Hardware Description and Installation Manual Issue 1.2 73 7.3.4 DSS/BLF Console Installation & Wiring LDP-7048 DSS Installation The digital LDP-7048 DSS/BLF Console is provided with a phone-mounting bracket so that the console can be securely fastened t…