VersaLogic VL-EBX-38 Hardware Reference Manual

55, Network Interfaces EBX-38 Hardware Reference Manual 45 ON-BOARD ETHERNET STATUS LEDS On-board status LEDs are provided for both Ethernet ports:  J1 (green LED) provides status for Ethernet port 0  J7 (green LED) provides status for Ethernet port 1 Figure 22. Locatio…

23, Configuration and Setup EBX-38 Hardware Reference Manual 13 BIOS Setup Utility The EBX-38 permits users to modify the BIOS Setup utility defaults. Refer to the EBX-38 BIOS Reference Manual (available on the EBX-38 Product Support Web Page for information on accessing and configuring setti…

58, Expansion Interfaces EBX-38 Hardware Reference Manual 48 PC/104-Plus Expansion Bus The EBX-38 provides a legacy stack-up PCI connector at locations J11(for PCI) and J10A and J10B (for ISA) on the top side of the board for PC/104-Plus (PCI +ISA) as well as PCI-104 (PCI only) and PC/104 (ISA o…

4, VersaLogic VL-EBX-38 EBX-38 Hardware Reference Manual iv Warranty Repair All parts and labor charges are covered, including return shipping charges for UPS Ground delivery to United States addresses. Non-warranty Repair All non-warranty repairs are subject to diagnosis and labor charges, parts charges …

28, Board Features EBX-38 Hardware Reference Manual 18 POWER BUTTON User I/O connector J4 includes an input for a push-button power switch. Shorting J4, pin 17 to ground causes the board to enter an S5 power state (similar to the Windows Shutdown state). Shorting it again return…

16, Introduction EBX-38 Hardware Reference Manual 6 HARDWARE ASSEMBLY The EBX-38 mounts on four hardware standoffs using the corner mounting holes, and four more surrounding the PC/104-Plus area. These standoffs are secured to the underside of the circuit board using pan head scre…