Pepwave MAX 700 Operation & User’s Manual

114, Pepwave MAX 700 Pepwave MAX and Surf User Manual http://www.pepwave.com 114 Copyright @ 2016 Pepwave Inbound M appings This setting specifies the WAN connections and corresponding WAN-specific Internet IP addresses on which the system should bind. Any access to the specified WAN co…

102, Pepwave MAX and Surf User Manual http://www.pepwave.com 102 Copyright @ 2016 Pepwave The bottom-most rule is D efault. Edit this rule to change the device’s default manner of controlling outbound traffic for all connections that do not match any of the rules above it. Un…

123, Pepwave MAX and Surf User Manual http://www.pepwave.com 123 Copyright @ 2016 Pepwave 19.2 Content Blocking 19.2.1 Application Blocking Choose applications to be blocked from LAN/PPTP/PepVPN peer clients' access, except for those on the Exempted User Groups or Exempted Subn…

54, Pepwave MAX and Surf User Manual http://www.pepwave.com 54 Copyright @ 2016 Pepwave Access Q uota Set a time and data cap to each user’s Internet usage. Quota Reset Time This menu determines how your usage quota resets. Setting it to Daily will reset it at a specif…

32, Pepwave MAX and Surf User Manual http://www.pepwave.com 32 Copyright @ 2016 Pepwave 4.15 Surf SOHO 4.15.1 Panel Appearance 4.15.2 LED Indicators T he statuses indicated by the front panel LEDs are as follows: Wi-Fi and Status Indicators Wi-Fi OFF Disabled Intermitten…

148, Pepwave MAX and Surf User Manual http://www.pepwave.com 148 Copyright @ 2016 Pepwave Admin Settings Router Name This field allows you to define a name for this Pepwave router. By default, Router Name is set as MAX_XXXX or Surf_SOHO_XXXX, where XXXX refers to the last 4 digits of…