HighGear Trailhead Operation & User’s Manual

12, 21 english 22 english SETTING THE INSTRUMENT FUNCTIONS SETTING THE INSTRUMENT FUNCTIONS SETTING THE TIMERS (CONTINUED) If TRAIN mode is selected: 1. Program Segment 1: Advance to set HOURS by PRESSING the MODE key. Adjust by PRESSING the START/LAP or STOP/NEXT keys. 2. Advance to set MINU…

15, 27 english 28 english OPERATING THE INSTRUMENT OPERATING THE CHRONOGRAPH Enduro instruments are equipped with a 24-hour, 100-lap Chronograph with 1/100- second resolution. In Chronograph mode: 1. PRESS the START/LAP key to BEGIN TIMING. 2. To ACTIVATE A LAP, PRESS the START/LAP …

11, 19 english 20 english SETTING THE INSTRUMENT FUNCTIONS SETTING THE INSTRUMENT FUNCTIONS SETTING THE TIMERS Enduro watches are equipped with 3 independent 24-hour Timers with enhanced functionality. In TIMER MODE, you can scroll through Timers 1 through 3 by PRESSING the STOP/NEXT …

3, HighGear Trailhead 3 TABLE OF CONTENTS english 4 TABLE OF CONTENTS english HOW TO USE THIS MANUAL 5 CARE & MAINTENANCE 6 REPLACING THE BATTERY 7 RESETTING THE INSTRUMENT 8 DISPLAY SYMBOLS AND THEIR MEANINGS 9 KEYS AND THEIR FUNCTIONS 11 MODES OF OPERATION 13 SETTING THE INSTRUMENT FUNCTIONS …

10, 17 english 18 english SETTING TIME/DATE (CONTINUED) 7. Advance to set MONTH by PRESSING the MODE key. Adjust by PRESSING the START/LAP or STOP/NEXT keys. 8. Advance to set DAY by PRESSING the MODE key. Adjust by PRESSING the START/LAP or STOP/NEXT keys. 9. Advance…

13, 23 english 24 english CALIBRATING THE COMPASS (CONTINUED) In Compass mode: 1. PRESS & HOLD the SET/CLEAR key to enter the calibration sequence. 2. ROTATE CAL will appear in the center of the display. 32- segment ring around the outside will animate clockwise to prompt the user to rotat…