Sargent and Greenleaf 8550 Manual, Installation And Combinatiion Changing Instructions

5, page 5 TO LOCK Turn the dial counterclockwise (left) at least ve complete revolutions for maximum security. COMBINATION CHANGING FROM 50 - 0 Make up a new combination, selecting three numbers of your own choosing. Do not set the third number of the combination between 90 and 99 or 0 an…

8, Sargent and Greenleaf 8550 page 8 ERRORS The most frequent error in the changing procedure is dialing the number to the wrong index. Occasionally all the numbers may be dialed to the opening index rather than the changing index. More often, dialing part of the combination to the changing index and part to…

4, page 4 15. Turn the dial at least one complete revolution in either direction, then stop at 50. The accelerator spring should now be in the loaded position. 16. Hold the lock cover in place and push the dial in at 50. The accelerator spring should not release. If the accelerator sprin…

7, page 7 4. Unscrew the dial and spindle assembly from the lock. Remove the drive cam. 5. Remove the Spirolox ® retainer from the top of the wheel post. 6. Remove the wheels and associated parts. Place them in sequence so they can be re-installed in the proper order. 7. Remove the lock bolt. …

1, page 1 S G Installation and Combinatiion Changing Instructions 8500 Series MP Safe Locks Models 8550 (Group 1) and 8560 (Group 1R) Copyright © 2002, Sargent & Greenleaf, Inc. Document 630-674 Revision 1.1 (7/7/03) Sargent & Greenleaf, Inc. PO Box 930, Nicholasville, Kentucky…