Wahl TM612 Operation & User’s Manual

4, TM612 - 7 - - 7 - A.3.8 Definitions A.3.8.1 Definition of the category and degree of pollution CAT II 60V: This notion of categories determines the maximum voltage which can be applied to the measuring inputs (it is also referred to as the over voltage category). For the TM612, the c…

3, TM612 - 5 - - 5 - A. GENERAL A.1 Introduction The TM612 is a portable RTD therm…

12, TM612 - 23 - - 23 - At this level, it is possible to - display the trend curve entirely: …

9, Wahl TM612 TM612 - 17 - - 17 - O nce the parameters have been set, the scaling is automatically enabled. To disable it, enter the Configuration/Scaling ON menu, select OFF and confirm by pressing the VAL key. D.2 Differential measurements The relative measurement function available on the device makes…

6, TM612 - 11 - - TM612A Connector TM612 - 12 - B.1.3 The USB connector The TM612 is fitted with a USB connector (mini B) intended for uploading new software versions and device adjustment. B.1.4 The screen The TM612 is fitted with a graphic LCD display with back-lighting.…

10, TM612 - 19 - - 19 - • Enter the sensor information fields. Use the F1 function key ( ) to move from one field to the next. • Confirm your choice using the VAL key. • To add a value in the table of calibration points, use the keys, enter the calibration points (…