Sungrow SBP4K8 Operation & User’s Manual

38, 32 9 Troubleshooting and maintenance 9.1 Troubleshooting Check the status of the indicator on the front of the battery to determine in what state the battery is. When the battery falls beyond the prescribed range, it goes into fault state with the indicator turning red. The …

37, 31 8 Commissioning Proceed as follows to put the battery in operation for the first time. 1. Switch on the AC circuit breaker next to the SH series hybrid inverter. 2. Switch on the DC circuit breaker between the SH series hybrid inverter and the battery. 3. Press the “O…

4, II Table 0-1 Safety and informative document symbols Symbol Explanation Indicates a hazard with a high level of risk that, if not avoided, will result in death or serious injury. Indicates a hazard with a medium level of risk that, if not avoided, could result in death or serious in…

8, 1 Safety SBP4K8 user manual 2 1.2 Notices for safe use Read all safety instructions carefully prior to any work and observe them at all times when working on or with the battery. Failure to observe the precautions described in this section can cause serious injury to person…

7, 1 1 Safety instructions This section describes the product's safety information. Before proceeding with unloading, unpacking, handling, installation and operation, read and fully understand the following details. Always follow the guidelines. 1.1 Description of symbols on the bat…

20, Sungrow SBP4K8 14 4 Installation process Install the battery according to the following flow chart. For a detailed reference, see Table 4-1. Figure 4-1 Installation flow chart Table 4-1 Explanation for the flow chart Order Explanation Reference 1 Unpacking and inspecting the delivery. 3.2.…