Subaru 2001 Forester Service Manual

17, 9. BRAKE PEDAL FOR AT MODEL S405001A0509 쐌 LHD model B4M2346A (1) Stopper (2) Bushing (3) Plug (4) Pedal bracket (5) Stop light switch (6) Spacer (7) Snap pin (8) Brake pedal pad (9) Brake pedal (10) Clevis pin (11) Brake spacer (12) Brake pedal spring Tightening torque: N·m (kgf-m, ft-lb…

3, 1. General Description S405001 A: SPECIFICATIONS S405001E49 Engine (cc) 2000 Driving system AWD Model Others Non-TURBO Australia TURBO Front disc brake Type Disc (Floating type, ventilated) Effective disc diameter mm (in) 228 (8.98) Disc thickness × Outer diameter mm (in) 24 × 277 (0.94 �…

29, C: INSPECTION S405177A10 1) Secure disc rotor by tightening the five wheel nuts. 2) Set a dial gauge on the disc rotor. Turn disc rotor to check runout. CAUTION: Securely adjust disc rotor to hub. B4M1771 NOTE: 쐌 Make sure that dial gauge is set 5 mm (0.20 in) inward of rotor outer…

58, C: DISASSEMBLY S405541A06 1. MT MODEL S405541A0601 쐌 LHD model 1) Remove the stop light switch. <Ref. to BR-60 REMOVAL, Stop Light Switch.> 2) Remove the clutch pedal. <Ref. to CL-38 DISASSEMBLY, Clutch Pedal.> 3) Remove the clutch master cylinder bracket. B4M2349 4) …

27, 5. Rear Brake Pad S405175 A: REMOVAL S405175A18 1) Loosen wheel nuts, jack-up vehicle, support it with safety stands, and remove wheel. 2) Remove lock pin. S4M0115 3) Raise caliper body. 4) Remove pad from support. NOTE: If brake pad is difficult to remove, use the same procedure as for front disc b…

25, Subaru 2001 Forester B: INSTALLATION S405176A11 1) Install disc rotor on hub. 2) Install support on housing. Tightening torque: 78 N·m (8 kgf-m, 58 ft-lb) CAUTION: 쐌 Always replace the pads for both the left and right wheels at the same time. Also replace pad clips if they are twisted or worn. 쐌 A wear …