StorageTek L180 Operator's Manual

15, 95895 Ninth Edition xiii Preface This guide describes how to operate the StorageTek L180 Tape Library (also referred to in this guide as the L180 library, tape library, or simply just library). Most of the information pertains to library hardware, refer to your appropriate tape drive or so…

47, 95895 Ninth Edition 2-5 Display Screens FSC Log The fault symptom code (FSC) Log displays the last 20 events and includes an FSC, the number of occurrences, and the date and time of the last occurrence. See “Reviewing the FSC Log” on page 3-31 for more information. The followin…

120, Counters B-2 Ninth Edition 95895 16-Bit Counters 16-bit counters have values from 0 to 2 16 minus 1 (or 65,535). Table B-1. 16-Bit Counters Bin Description IPL Number of times the machine was booted. No distinction is made between powering-on or pressing the RESET button. Door Open…

40, StorageTek L180 Power System 1-12 Ninth Edition 95895 ■ Power System The library power system consisting of: • One or two AC power distribution units (PDUs) • One or two DC power supplies that provide voltage to the library •An optional uninterruptible power supply AC Power Distribution Units …

41, 95895 Ninth Edition 1-13 Library Safety Features ■ Library Safety Features Safety features are incorporated into the library include: • An electronic interlock to remove power from the robot if the front door to the library is opened. • Protective covers in the electronics compartment …

114, LTO Ultrium Cartridges A-12 Ninth Edition 95895 Setting the Write-protect Switch As shown in Figure A-5, you can set the write-protect switch so that the cartridge is write-enabled. • Slide the switch to reveal the “open lock” symbol to write-enable the tapes. In this position, the tape …